Small 7g (0.25oz) lightweight 3/18 channel 2.4GHz FASST S.Bus receiver with complete range. Super slender for models with narrow fuselage. With S.Bus system for up to 18 channels, suitable for mini helicopter up to big flight models.
To the outputs 1...3 three conventional analog or digital servos can be connected. The R6203SB receiver uses a switch for digital and analog servos. So at the outputs 1...3 the pulse output for digital servos faster, that causes a shorter response time.
Furthermore the receiver is switchable from 7Kan to multi mode and in this way compatible to all Futaba FASST 6-14 channel systems.
The 2 antenna diversity systems verifies the signal level of both antenna inputs permanently and switches without any transition to the better signal.
S.Bus output
To this output up to 18 of the new programmalbe S.Bus servos or peripheral devices like gyro stabilizers, Flybarless systems or RPM governor can be connected directly. One feed-line for all channels. No cable confusion and smaller weight.
Additional standard servos can be connected to the receiver with a S.Bus PWM adapter.
Note: When using 7.4V LiPo batteries as receiver battery also the connected servos have to work with that voltage. The receiver doesn't have an internal limiter for the servo voltage.
Technical Data:
- Current: 50mA
- Voltage: 3.7...7.4V (4...5Nx / 1...2LiPo)
- Channels: 18
- Transmitter system: FSK / HRS-FSK
- Weight: approx. 7g / 0.25oz
- Channel spacing: 2048kHz
- Frequency channels: 36
- Dimensions: 37.5 x 22.5 x 9.3mm / 1.48 x 0.89 x 0.37in
- Antenna length: 14cm / 5.51in
- Frequency band: 2.4 – 2.4835GHz
